INTOPLAN SE Cement-based rapid screed, 25 kg
Polymer-modified rapid screed that is only mixed with water to a stiff-plastic consistency and then installed. Tiles can be laid after 3 - 4 hours. Residual moisture after 24 hours = 3 %. The strength of a ZE 20 required by DIN 18 560 is achieved after one day.
| Water requirement for 25 kg | 2 l |
| Layer thickness | 20 to 80 mm |
| Processing time | approx. 40 min |
| Fixable after | approx. 2-3 hours |
| Ready for publishing after | approx. 24 hours |
| Binder base | Cement |
| Chromate poor | yes |
| Self-progressing | no |
| Plastic-coated | yes |
| Pumpable | yes |
| Suitable for indoor use | yes |
| Suitable for outdoor use | yes |
| Suitable for underfloor heating | yes |
| Suitable for chair castors (from 1mm) | yes |
| GISCODE | ZP 1 |
| Material consumption per m² | 2 kg / mm |
DANGER
This product contains portland cement and calcium hydroxide.
Causes skin irritation. Causes serious eye damage.
May cause respiratory irritation.
INTOPLAN
INTOPLAN GmbH Bauchemie, Bahnhofstr. 15, D-09439 Amtsberg
-
Technische Information
Technische Information
Leistungserklärung
Leistungserklärung
Sicherheitsdatenblatt
Sicherheitsdatenblatt